NIPPON HI-FLORO 6738 FLUOROCARBON TOP COAT

HI-FLORO 6738 FLUOROCARBON TOP COAT is a two-pack, fast dry fluorocarbon finish coat. It provides excellent film stability, good resistance of contamination, weathering and chemicals.

Intended Use:

NIPPON TAIKALITT S-100 NCB INTUMESCENT PAINT

NIPPON TAIKALITT S-100 NCB - A single component, acrylic intumescent heat insulation paint, providing excellent fireproof performance, good film appearance and easy application.

Intended Use:

NIPPON HI-PON 90-01A EPOXY GLASS FLAKE HB 82

HI-PON 90-01A EPOXY GLASS FLAKE HB 82 is a low VOC, high solids, high build two-pack epoxy coating, reinforced with glass flakes.

Intended Use:

NIPPON HI-PON 90-01 EPOXY GLASS FLAKE HB 95

HI-PON 90-01 EPOXY GLASS FLAKE HB 95 is a two-pack, low VOC, high solids, high build epoxy coating, reinforced with glass flakes. It provides excellent corrosion protection and has good abrasion resistance. Suitable for seawater immersion.

Intended Use:

NIPPON HI-PON 80-04 EPOXY PHENOLIC TOP COAT

HI-PON 80-04 EPOXY PHENOLIC TOP COAT is a two-pack epoxy phenolic coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as nonimmersion services.

Intended Use:

NIPPON HI-PON 50-03 POLYURETHANE TOP COAT

HI-PON 50-03 POLYURETHANE TOP COAT is two-pack, semi-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.

Intended Use:

NIPPON HI-PON 50-01 POLYURETHANE TOP COAT

HI-PON 50-01 POLYURETHANE TOP COAT is a two-pack, aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.

Intended Use:

NIPPON HI-PON 40-04 EPOXY TOP COAT

HI-PON 40-04 EPOXY TOP COAT is a two-pack amine-adduct cured epoxy finish coat for use on steel and concrete surfaces where chemical, oil and abrasion resistant coating is required. HI-PON 40-04 EPOXY TOP COAT is also available in non-skid quality.

Intended Use:

NIPPON HI-PON 40-02 EPOXY TOP COAT

HI-PON 40-02 EPOXY TOP COAT is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. A durable, high performance and economical coating for atmospheric as well as immersion services.

Intended Use:

NIPPON HI-PON 30-02 EPOXY MIO 80

NIPPON HI-PON 30-02 EPOXY MIO 80 is a two-pack, polyamide cured, high solids, fast dry epoxy coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.

Intended Use:

NIPPON HI-PON 20-10 EPOXY ZINC PHOSPHATE 63

NIPPON HI-PON 20-07 EPOXY ZINC PHOSPHATE 70 is a two-pack, fast drying polyamide-cured epoxy primer pigmented with zinc phosphate. Suitable for properly prepared carbon steel, galvanized steel, shop primed steel, aluminium and concrete.

Intended Use:

NIPPON HI-PON 20-07 EPOXY ZINC PHOSPHATE 70

NIPPON HI-PON 20-07 EPOXY ZINC PHOSPHATE 70 is a two-pack, high build, fast drying polyamide-cured epoxy coating pigmented with zinc phosphate. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of carbon steel and galvanized steel in atmospheric environments.

Intended Use: