FLOOR-ULTRA 1202 SB EPOXY PRIMER
Product information
FLOOR-ULTRA 1202 SB EPOXY PRIMER is a two-pack, solvent-based high gloss Polyamide Epoxy Primer for use on concrete floor and wall surfaces with excellent penetration and sealing properties to provide excellent adhesion to concrete.
Product features
Surface preparation
|
Type |
Product |
No of coats |
| Primer |
FLOOR-ULTRA 1202 SB EPOXY PRIMER |
1-3 Coats |
| Finish | FLOOR-ULTRA 5203 SB EPOXY FINISH FLOOR-ULTRA 5204 SB EPOXY FINISH FLOOR-ULTRA 5301 SB PU FINISH FLOOR-ULTRA 5302 SB PU FINISH FLOOR-PRO 302 AQUA EPOXY FINISH FLOOR-PRO 307 SF EPOXY FINISH |
1-3 Coats |
|
To select a paint system for another application, refer to the product documentation or contact Nippon Paint (Vietnam) for consulting support. |
||
Construction Manual
|
Application Areas |
As a curing compound for application on concrete to retard the escape of moisture during cure period. Application prior to surfacing assures tight adhesion between concrete and surfaces. |
|
Application Methods |
Add all the Part B into Part A and mix both liquid parts thoroughly for 1 minute by using a suitable electrical stirrer until a fully homogeneous mix has been achieved. Transfer the mixture to a clean container and mix for another minute. Avoid inclusion of air during mixing process. |
|
Paint Consumption |
Approx. 0.1L/m2/coat dependent on concrete porosity |
|
Recoating time |
Minimum 8 hours at 25 - 30°C |
|
Dilution Thinner |
NIPPON THINNER FLOOR ULTRA EPX |
|
Cleaning Solvent |
NIPPON THINNER FLOOR ULTRA EPX |
| Packaging |
5L, 20L |
