Weatherbond Flex
Product information
Weatherbond Flex is a water based Acrylic Polymer Rubber-based Elastic Coating with the following properties:
- Cover hairline cracks
- Good water-proofing, thus preventing water penetration into concrete which will corrode the reinforced steel bar inside the concrete.
- Solar reflective property
Surface preparation
| Cements plasters, Concrete, Brickworks | ||
| Type | Product | No. of coat |
| Skimcoat | Weatherbond Skimcoat | 1-2 coats |
| Sealer | Weatherbond Flex Sealer/ Weatherbond Sealer | 1 coat |
| Finishing | Weatherbond Flex For severe hairline crack, an additional coat of Weatherbond Flex is highly recommended |
2 coats |
Construction Manual
 Application Methods |
Brush, roller or airless spray |
 Drying Time |
Surface dry: 1 hour at 30°C |
 Overcoating time |
4 hours based on normal conditions at 30°C At 60 Microns DFT 6 hours based on normal conditions at 30°C At 90 Microns DFT |
 Recommended Film Thickness |
60 - 90 microns DFT (Dry Film Thickness) 113 - 200 microns WFT (Wet Film Thickness) |
 Finish |
Low sheen Colour: Wide range of decorative colours as per colour card. Special colours on request |
 Packaging |
18 Liters |
