NIPPON ZINKY-12 INORGANIC ZINC RICH PRIMER 77
Product information
Zinky-12 Inorganic Zinc Rich Primer 77 is a two-pack, solvent-based inorganic zinc ethyl silicate coating. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents. It has been tested for Slip Coefficient and Creep Resistance, using ASTM A490 bolts and meets Class B requirements by RCSC Specification for Structural Joints Using High-Strength Bolts (Appendix A).
The level of zinc dust by weight present in the dried film conforms to SSPC- Paint 20 (Level 2). The type of zinc dust used complies with ASTM D 520 (Type II).
Intended Use:
- It is designed for severe corrosive environments such as offshore platforms, petrochemical complexes, gas and petroleum refineries, pulp and paper mills and corrosive chemical plants. Provide excellent corrosion protection of properly prepared carbon steel exposed up to temperature of 540 °C, with suitable top coat.
▪ Tested in accordance with JIS K 5553 Class 1 (Report No.: 211769)
▪ Tested in accordance with the Research Council on Structural Connections, Specification for Structural Joints using High Strength Bolts (Slip Coefficient and Creep Resistance)
Physical Characteristics of Paint:
- Colour: Grey
- Gloss Level: Matt
- Volume Solids, %: 62 ± 2 %
- Specific Gravity: 2.18 - 0.05 kg/l (Mixed)
- Flash point:
- Base: 23°C
- Hardener: N/A
- Mix: 23°C
- VOC: 510 g/L (EPA Method 24)
- Typical Thickness:
- 50 - 75ųm dry film
- 81 - 121ųm wet film
