NIPPON ZINKY-13 INORGANIC ZINC RICH PRIMER 85

Zinky-13 Inorganic Zinc Rich Primer 85 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Zinky-13 can also be used as a shop primer with additional thinning. The level of zinc dust by weight present in the dried film conforms to SSPCPaint 20 (Level 1) and ISO 12944-5. The type of zinc dust used complies with ASTM D 520 (Type II).

Intended Use:

• It is designed for severe corrosive environments such as offshore platforms, petrochemical complexes, gas and petroleum refineries, pulp and paper mills and corrosive chemical plants. Provide excellent corrosion protection of properly prepared steel exposed up to temperature of 540 °C, with suitable top coat.
   Tested in accordance with ISO 12944-9, Corrosivity Category CX

Physical Characteristics of Paint:

• Colour: Grey
• Gloss Level: Matt
• Volume Solids, %: 62 ± 2 %
• Specific Gravity: 2.67 - 0.05 kg/l (Mixed)
• Flash point:

1. Base: 23°C
2. Hardener: N/A
3. Mix: 23°C

• VOC: 500 g/L (EPA Method 24)
• Typical Thickness:

1. 50 - 75ųm dry film
2. 81 - 121ųm wet film