BILAC FD is a single component solvent-borne Oil-Modified Alkyd paint with fast drying, good durability, higher gloss and better opacity properties. BILAC FD is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

NIPPON POLYURETHANE is a two-pack Polyurethane Finish based on the chemical reaction of the polyfunctional Acrylic Polyol and the Isocyanate based material with excellent weathering resistance coating. High duty finishes for maximum gloss and colour retention.

NIPPON EP4 CLEAR SEALER is a two-pack, high gloss Polyamide Epoxy Finish for use on concrete, plaster, brick and most types of building boards and. It is recommended for non-immersion services.

Physical Characteristics of Paint:

NIPPON EA4 is a two-pack, high gloss Amine-Adduct Epoxy coating for use on steel, concrete, plaster, brick and most types of building boards and blocks where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. Non-skid quality available upon request.

Physical Characteristics of Paint

NIPPON S450 HEAT RESISTING BLACK is based on silicone resin with pigment which can withstand continuous temperature up to 450°C, provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

NIPPON HEAT RESISTING ALUMINIUM is a silicone based coating which can withstand continuous temperature up to 600°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

Physical Characteristics of Paint:

NIPPON S350 HEAT RESISTING AL is a silicone based coating which can withstand continuous temperature up to 350°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

Physical Characteristics of Paint:

NIPPON S500 HEAT RESISTING PRIMER is a silicone based coating with Zinc Dust Anti corrosive pigment which can withstand continuous temperature up to 500°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

BILAC is a single component solvent-borne Oil-Modified Alkyd paint with good durability, higher gloss and better opacity properties. BILAC is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

BILAC METAL RED OXIDE PRIMER is an Oil-Modified Alkyd based anti-rust primer used as an economical protective coating for iron and steel surfaces under non-immersion condition.

Physical Characteristics of Paint