HI-FLORO 6738 FLUOROCARBON TOP COAT is a two-pack, fast dry fluorocarbon finish coat. It provides excellent film stability, good resistance of contamination, weathering and chemicals.

Intended Use:

HI-PON 90-01A EPOXY GLASS FLAKE HB 82 is a low VOC, high solids, high build two-pack epoxy coating, reinforced with glass flakes.

Intended Use:

HI-PON 90-01 EPOXY GLASS FLAKE HB 95 is a two-pack, low VOC, high solids, high build epoxy coating, reinforced with glass flakes. It provides excellent corrosion protection and has good abrasion resistance. Suitable for seawater immersion.

Intended Use:

HI-PON 50-01 POLYURETHANE TOP COAT is a two-pack, aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.

Intended Use:

HI-PON 40-04 EPOXY TOP COAT is a two-pack amine-adduct cured epoxy finish coat for use on steel and concrete surfaces where chemical, oil and abrasion resistant coating is required. HI-PON 40-04 EPOXY TOP COAT is also available in non-skid quality.

Intended Use:

NIPPON EP 10-04 STE 70 is a two-pack, polyamide cured, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel in atmospheric environments. Suitable for properly prepared carbon steel, galvanized steel, aluminium and concrete.

Intended Use:

BILAC FD is a single component solvent-borne Oil-Modified Alkyd paint with fast drying, good durability, higher gloss and better opacity properties. BILAC FD is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

NIPPON EP4 CLEAR SEALER is a two-pack, high gloss Polyamide Epoxy Finish for use on concrete, plaster, brick and most types of building boards and. It is recommended for non-immersion services.

Physical Characteristics of Paint:

NIPPON S450 HEAT RESISTING BLACK is based on silicone resin with pigment which can withstand continuous temperature up to 450°C, provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

NIPPON HEAT RESISTING ALUMINIUM is a silicone based coating which can withstand continuous temperature up to 600°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

Physical Characteristics of Paint:

BILAC is a single component solvent-borne Oil-Modified Alkyd paint with good durability, higher gloss and better opacity properties. BILAC is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

BILAC METAL RED OXIDE PRIMER is an Oil-Modified Alkyd based anti-rust primer used as an economical protective coating for iron and steel surfaces under non-immersion condition.

Physical Characteristics of Paint