Zinky-22 Epoxy Zinc Rich Primer 80 is a two-pack, polyamide cured, fast dry, zinc-rich epoxy primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film.

Zinky-13 Inorganic Zinc Rich Primer 85 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Zinky-12 Inorganic Zinc Rich Primer 77 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Hi-Pon 30-03 Epoxy Midcoat 80 is a two-pack, polyamide cured, high solids, fast dry epoxy coating. It provides a high build barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.

Intended Use:

Hi-Pon 80-03 Epoxy Phenolic Primer is a two-pack epoxy phenolic coating for blast cleaned steel surfaces. Its wide range of chemical resistance properties has made it a durable, high-performance coating for steelwork and concrete surface with immersion as well as non-immersion services.

Intended Use:

Hi-Pon 20-09 Epoxy Shop Primer FD is a two-pack, fast drying amidecured epoxy prefabrication primer.

Intended Use:

Hi-Pon 20-03 Epoxy Red Oxide Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high-performance primer for many types of surfaces i.e. carbon steel, galvanized steel, shop primed steel, aluminium, concrete, GRP and phenolic sheeting.

Intended Use:

Hi-Pon 20-01 Epoxy Primer is a two-pack, high solids epoxy coating that offers good cathodic protection, and excellent resistance to water and seawater.

Intended Use:

Universal anti-corrosive primer for use in aggressive environment. It is also suitable to be over-coated with various kinds of finishing coats.

NIPPON EP 10-04 STE 70 is a two-pack, surface-tolerant, high solids epoxy coating that can be applied in high film thickness. It is an anticorrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric exposure. 

Intended Use:

BILAC FD is a single component solvent-borne Oil-Modified Alkyd paint with fast drying, good durability, higher gloss and better opacity properties. BILAC FD is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

NIPPON POLYURETHANE is a two-pack Polyurethane Finish based on the chemical reaction of the polyfunctional Acrylic Polyol and the Isocyanate based material with excellent weathering resistance coating. High duty finishes for maximum gloss and colour retention.

NIPPON 1226 EPOTAR HB BLACK is a two pack, polyamide cured, high-build coal tar epoxy coating. It can be applied up to 350 microns or even thicker in one coat. This is intended for immersion and non-immersion services which require excellent protection against fresh and salt water, abrasion and splashes of corrosive chemicals.

NIPPON EA9 is a two-pack, low gloss Amine Adduct Epoxy Finish coating specially developed to achieve long term corrosion protection for many types of surfaces i.e. aluminium, galvanizing, steel and concrete for corrosion environment. It is specially formulated for use as finishing lining for storage tank of palm oil derivatives, vegetable oil, potable water, etc...

NIPPON EA4 is a two-pack, high gloss Amine-Adduct Epoxy coating for use on steel, concrete, plaster, brick and most types of building boards and blocks where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. Non-skid quality available upon request.

Physical Characteristics of Paint

NIPPON S450 HEAT RESISTING BLACK is based on silicone resin with pigment which can withstand continuous temperature up to 450°C, provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

NIPPON HEAT RESISTING ALUMINIUM is a silicone based coating which can withstand continuous temperature up to 600°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

Physical Characteristics of Paint:

NIPPON S350 HEAT RESISTING AL is a silicone based coating which can withstand continuous temperature up to 350°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

Physical Characteristics of Paint:

NIPPON S500 HEAT RESISTING PRIMER is a silicone based coating with Zinc Dust Anti corrosive pigment which can withstand continuous temperature up to 500°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

NIPPON EPOXY MIO is a two-pack high build polyamide cured epoxy coating containing Micaceous Iron Oxide pigment. It is specially formulated to give high order of protection for steel structure again corrosion. If it is to be applied over steel surface, it is preferable to be used in combination with the primers as recommended.

NIPPON PU UNDERCOAT WHITE is a two-pack Polyurethane Paint based on the chemical reaction of the polyfunctional acrylic and the isocyanate based material.

NIPPON ZINC RICH PRIMER HS is a two-pack Epoxy shop primer for use on abrasive blasted steel prior to application of final paint system. It is recommended where high level of corrosive resistance is required.

Physical Characteristics of Paint

NIPPON ZINC PHOSPHATE BLAST PRIMER is a two-pack Epoxy-Amine anti-corrosive primer with non-toxic Zinc Phosphate as its pigment. It is recommended for use in combination with Nippon EA-4 Finish, Nippon EA-9 Finish and Nippon Polyurethane Finish for corrosive environment.

Performance Characteristics

BILAC is a single component solvent-borne Oil-Modified Alkyd paint with good durability, higher gloss and better opacity properties. BILAC is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

NIPPON 1105 FAST DRYING PRIMER is a blend of special fast drying binder with zinc phosphate anti-corrsive pigments to protect metal from rusting under mild and moderate conditions for long period of time. 

Physical Characteristics of Paint