HI-PON 80-04 EPOXY PHENOLIC TOP COAT is a two-pack epoxy phenolic coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as nonimmersion services.

Intended Use:

NIPPON HI-PON 30-02 EPOXY MIO 80 is a two-pack, polyamide cured, high solids, fast dry epoxy coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.

Intended Use:

NIPPON HI-PON 20-07 EPOXY ZINC PHOSPHATE 70 is a two-pack, fast drying polyamide-cured epoxy primer pigmented with zinc phosphate. Suitable for properly prepared carbon steel, galvanized steel, shop primed steel, aluminium and concrete.

Intended Use:

ZINKY-25 EPOXY ZINC PRIMER 45 is a two-pack, polyamide cured, epoxy zinc primer. It provides excellent corrosion resistance with hard, abrasion
and weathering resistant film

ZINKY-25 EPOXY ZINC PRIMER 45 is a two-pack, polyamide cured, epoxy zinc primer. It provides excellent corrosion resistance with hard, abrasion
and weathering resistant film.

The type of zinc dust used complies with ASTM D 520 (Type II).

Intended Use:

Zinky-22 Epoxy Zinc Rich Primer 80 is a two-pack, polyamide cured, fast dry, zinc-rich epoxy primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film.

Zinky-13 Inorganic Zinc Rich Primer 85 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Zinky-12 Inorganic Zinc Rich Primer 77 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Hi-Pon 30-03 Epoxy Midcoat 80 is a two-pack, polyamide cured, high solids, fast dry epoxy coating. It provides a high build barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.

Intended Use:

Hi-Pon 80-03 Epoxy Phenolic Primer is a two-pack epoxy phenolic coating for blast cleaned steel surfaces. Its wide range of chemical resistance properties has made it a durable, high-performance coating for steelwork and concrete surface with immersion as well as non-immersion services.

Intended Use:

Hi-Pon 20-09 Epoxy Shop Primer FD is a two-pack, fast drying amidecured epoxy prefabrication primer.

Intended Use:

Hi-Pon 20-03 Epoxy Red Oxide Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high-performance primer for many types of surfaces i.e. carbon steel, galvanized steel, shop primed steel, aluminium, concrete, GRP and phenolic sheeting.

Intended Use:

NIPPON NIOZ is a two-pack solvent based coating based on Ethyl Silicate and Zinc Dust. It is suitable for use on steel as a shop primer, as a primer for high performance system and as a single treatment coating for a variety of marine environment.

NIPPON ZINC RICH PRIMER HS is a two-pack Epoxy shop primer for use on abrasive blasted steel prior to application of final paint system. It is recommended where high level of corrosive resistance is required.

Physical Characteristics of Paint

NIPPON ZINC PHOSPHATE BLAST PRIMER is a two-pack Epoxy-Amine anti-corrosive primer with non-toxic Zinc Phosphate as its pigment. It is recommended for use in combination with Nippon EA-4 Finish, Nippon EA-9 Finish and Nippon Polyurethane Finish for corrosive environment.

Performance Characteristics