HI-FLORO 6738 FLUOROCARBON TOP COAT is a two-pack, fast dry fluorocarbon finish coat. It provides excellent film stability, good resistance of contamination, weathering and chemicals.

Intended Use:

NIPPON TAIKALITT S-100 NCB - A single component, acrylic intumescent heat insulation paint, providing excellent fireproof performance, good film appearance and easy application.

Intended Use:

HI-PON 90-01A EPOXY GLASS FLAKE HB 82 is a low VOC, high solids, high build two-pack epoxy coating, reinforced with glass flakes.

Intended Use:

HI-PON 90-01 EPOXY GLASS FLAKE HB 95 is a two-pack, low VOC, high solids, high build epoxy coating, reinforced with glass flakes. It provides excellent corrosion protection and has good abrasion resistance. Suitable for seawater immersion.

Intended Use:

HI-PON 80-04 EPOXY PHENOLIC TOP COAT is a two-pack epoxy phenolic coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as nonimmersion services.

Intended Use:

HI-PON 50-03 POLYURETHANE TOP COAT is two-pack, semi-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.

Intended Use:

HI-PON 50-01 POLYURETHANE TOP COAT is a two-pack, aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.

Intended Use:

HI-PON 40-04 EPOXY TOP COAT is a two-pack amine-adduct cured epoxy finish coat for use on steel and concrete surfaces where chemical, oil and abrasion resistant coating is required. HI-PON 40-04 EPOXY TOP COAT is also available in non-skid quality.

Intended Use:

HI-PON 40-02 EPOXY TOP COAT is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. A durable, high performance and economical coating for atmospheric as well as immersion services.

Intended Use:

NIPPON HI-PON 30-02 EPOXY MIO 80 is a two-pack, polyamide cured, high solids, fast dry epoxy coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.

Intended Use:

NIPPON HI-PON 20-07 EPOXY ZINC PHOSPHATE 70 is a two-pack, fast drying polyamide-cured epoxy primer pigmented with zinc phosphate. Suitable for properly prepared carbon steel, galvanized steel, shop primed steel, aluminium and concrete.

Intended Use:

ZINKY-25 EPOXY ZINC PRIMER 45 is a two-pack, polyamide cured, epoxy zinc primer. It provides excellent corrosion resistance with hard, abrasion
and weathering resistant film

ZINKY-25 EPOXY ZINC PRIMER 45 is a two-pack, polyamide cured, epoxy zinc primer. It provides excellent corrosion resistance with hard, abrasion
and weathering resistant film.

The type of zinc dust used complies with ASTM D 520 (Type II).

Intended Use:

Zinky-22 Epoxy Zinc Rich Primer 80 is a two-pack, polyamide cured, fast dry, zinc-rich epoxy primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film.

Zinky-13 Inorganic Zinc Rich Primer 85 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Zinky-12 Inorganic Zinc Rich Primer 77 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Hi-Pon 30-03 Epoxy Midcoat 80 is a two-pack, polyamide cured, high solids, fast dry epoxy coating. It provides a high build barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.

Intended Use:

Hi-Pon 80-03 Epoxy Phenolic Primer is a two-pack epoxy phenolic coating for blast cleaned steel surfaces. Its wide range of chemical resistance properties has made it a durable, high-performance coating for steelwork and concrete surface with immersion as well as non-immersion services.

Intended Use:

Hi-Pon 20-09 Epoxy Shop Primer FD is a two-pack, fast drying amidecured epoxy prefabrication primer.

Intended Use:

Hi-Pon 20-03 Epoxy Red Oxide Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high-performance primer for many types of surfaces i.e. carbon steel, galvanized steel, shop primed steel, aluminium, concrete, GRP and phenolic sheeting.

Intended Use:

Hi-Pon 20-01 Epoxy Primer is a two-pack, high solids epoxy coating that offers good cathodic protection, and excellent resistance to water and seawater.

Intended Use:

Universal anti-corrosive primer for use in aggressive environment. It is also suitable to be over-coated with various kinds of finishing coats.

NIPPON EP 10-04 STE 70 is a two-pack, polyamide cured, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel in atmospheric environments. Suitable for properly prepared carbon steel, galvanized steel, aluminium and concrete.

Intended Use:

BILAC FD is a single component solvent-borne Oil-Modified Alkyd paint with fast drying, good durability, higher gloss and better opacity properties. BILAC FD is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

NIPPON EP4 CLEAR SEALER is a two-pack, high gloss Polyamide Epoxy Finish for use on concrete, plaster, brick and most types of building boards and. It is recommended for non-immersion services.

Physical Characteristics of Paint:

NIPPON S450 HEAT RESISTING BLACK is based on silicone resin with pigment which can withstand continuous temperature up to 450°C, provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

NIPPON HEAT RESISTING ALUMINIUM is a silicone based coating which can withstand continuous temperature up to 600°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

Physical Characteristics of Paint:

NIPPON EPOXY MIO is a two-pack high build polyamide cured epoxy coating containing Micaceous Iron Oxide pigment. It is specially formulated to give high order of protection for steel structure again corrosion. If it is to be applied over steel surface, it is preferable to be used in combination with the primers as recommended.

NIPPON EA9 WHITE PRIMER is a two-pack, low gloss Amine Adduct Epoxy Primer specially developed to achieve long term corrosion protection for many types of surfaces i.e. aluminium, galvanizing, steel and concrete for corrosion environment. It can be used as intermediate or finish lining for storage tank of palm oil derivatives, vegetable oil, potable water, etc.

NIPPON EA9 RED OXIDE PRIMER is a two-pack, low gloss Amine Adduct Epoxy Primer designed for use as a high performance primer for many types of surfaces i.e. aluminium, galvanizing, steelwork, concrete, GRP and phenolic sheeting for corrosion environment.

NIPPON ZINC RICH PRIMER HS is a two-pack Epoxy shop primer for use on abrasive blasted steel prior to application of final paint system. It is recommended where high level of corrosive resistance is required.

Physical Characteristics of Paint

NIPPON ZINC PHOSPHATE BLAST PRIMER is a two-pack Epoxy-Amine anti-corrosive primer with non-toxic Zinc Phosphate as its pigment. It is recommended for use in combination with Nippon EA-4 Finish, Nippon EA-9 Finish and Nippon Polyurethane Finish for corrosive environment.

Performance Characteristics

BILAC is a single component solvent-borne Oil-Modified Alkyd paint with good durability, higher gloss and better opacity properties. BILAC is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

BILAC METAL RED OXIDE PRIMER is an Oil-Modified Alkyd based anti-rust primer used as an economical protective coating for iron and steel surfaces under non-immersion condition.

Physical Characteristics of Paint