HI-FLORO 6738 FLUOROCARBON TOP COAT is a two-pack, fast dry fluorocarbon finish coat. It provides excellent film stability, good resistance of contamination, weathering and chemicals.

Intended Use:

NIPPON TAIKALITT S-100 NCB - A single component, acrylic intumescent heat insulation paint, providing excellent fireproof performance, good film appearance and easy application.

Intended Use:

HI-PON 90-01A EPOXY GLASS FLAKE HB 82 is a low VOC, high solids, high build two-pack epoxy coating, reinforced with glass flakes.

Intended Use:

HI-PON 90-01 EPOXY GLASS FLAKE HB 95 is a two-pack, low VOC, high solids, high build epoxy coating, reinforced with glass flakes. It provides excellent corrosion protection and has good abrasion resistance. Suitable for seawater immersion.

Intended Use:

HI-PON 80-04 EPOXY PHENOLIC TOP COAT is a two-pack epoxy phenolic coating for blast cleaned and primed steel surfaces. Its wide range of chemical resistance properties has made it a durable, high performance coating for steelwork and concrete surface with immersion as well as nonimmersion services.

Intended Use:

HI-PON 50-03 POLYURETHANE TOP COAT is two-pack, semi-gloss aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.

Intended Use:

HI-PON 50-01 POLYURETHANE TOP COAT is a two-pack, aliphatic acrylic polyurethane finish coat. It provides high durability, excellent gloss and colour retention. It also offers good abrasion, chemical and impact resistance when applied over proven systems.

Intended Use:

HI-PON 40-04 EPOXY TOP COAT is a two-pack amine-adduct cured epoxy finish coat for use on steel and concrete surfaces where chemical, oil and abrasion resistant coating is required. HI-PON 40-04 EPOXY TOP COAT is also available in non-skid quality.

Intended Use:

HI-PON 40-02 EPOXY TOP COAT is a two-pack amine-adduct cured epoxy finish coat specially developed to achieve long-term corrossion protection for many type of surfaces i.e. aluminium, galvanising, concrete and mild steel. A durable, high performance and economical coating for atmospheric as well as immersion services.

Intended Use:

NIPPON HI-PON 30-02 EPOXY MIO 80 is a two-pack, polyamide cured, high solids, fast dry epoxy coating pigmented with micaceous iron oxide. It provides a high build impervious barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.

Intended Use:

NIPPON HI-PON 20-07 EPOXY ZINC PHOSPHATE 70 is a two-pack, fast drying polyamide-cured epoxy primer pigmented with zinc phosphate. Suitable for properly prepared carbon steel, galvanized steel, shop primed steel, aluminium and concrete.

Intended Use:

NIPPON HI-PON 20-07 EPOXY ZINC PHOSPHATE 70 is a two-pack, high build, fast drying polyamide-cured epoxy coating pigmented with zinc phosphate. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of carbon steel and galvanized steel in atmospheric environments.

Intended Use:

HI-PON 20-04 STE IM 80 is a two-pack, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel and other substrates in atmospheric and immersed environments.

Intended Use:

ZINKY-25 EPOXY ZINC PRIMER 45 is a two-pack, polyamide cured, epoxy zinc primer. It provides excellent corrosion resistance with hard, abrasion
and weathering resistant film

ZINKY-25 EPOXY ZINC PRIMER 45 is a two-pack, polyamide cured, epoxy zinc primer. It provides excellent corrosion resistance with hard, abrasion
and weathering resistant film.

The type of zinc dust used complies with ASTM D 520 (Type II).

Intended Use:

Zinky-22 Epoxy Zinc Rich Primer 80 is a two-pack, polyamide cured, fast dry, zinc-rich epoxy primer. It provides excellent corrosion resistance with hard, abrasion and weathering resistant film.

Zinky-13 Inorganic Zinc Rich Primer 85 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Zinky-12 Inorganic Zinc Rich Primer 77 is a two-pack, solvent-based coating composed of ethyl silicate and zinc dust. It is suitable for use on steel as a primer for high performance systems and as a single treatment coating for a variety of marine environment. It prevents corrosion and provides excellent resistance to weathering, abrasion, impact, heat and many solvents.

Hi-Pon 30-03 Epoxy Midcoat 80 is a two-pack, polyamide cured, high solids, fast dry epoxy coating. It provides a high build barrier coating that gives excellent adhesion, surface wetting properties and anti-corrosive properties.

Intended Use:

Hi-Pon 80-03 Epoxy Phenolic Primer is a two-pack epoxy phenolic coating for blast cleaned steel surfaces. Its wide range of chemical resistance properties has made it a durable, high-performance coating for steelwork and concrete surface with immersion as well as non-immersion services.

Intended Use:

Hi-Pon 20-09 Epoxy Shop Primer FD is a two-pack, fast drying amidecured epoxy prefabrication primer.

Intended Use:

Hi-Pon 20-03 Epoxy Red Oxide Primer is a two-pack amine-adduct cured epoxy primer designed for use as a high-performance primer for many types of surfaces i.e. carbon steel, galvanized steel, shop primed steel, aluminium, concrete, GRP and phenolic sheeting.

Intended Use:

Hi-Pon 20-01 Epoxy Primer is a two-pack, high solids epoxy coating that offers good cathodic protection, and excellent resistance to water and seawater.

Intended Use:

Universal anti-corrosive primer for use in aggressive environment. It is also suitable to be over-coated with various kinds of finishing coats.

NIPPON EP 10-04 STE 70 is a two-pack, polyamide cured, surface-tolerant, high solids epoxy mastic coating. It is an anti-corrosive primer and / or intermediate coating for corrosion protection of steel in atmospheric environments. Suitable for properly prepared carbon steel, galvanized steel, aluminium and concrete.

Intended Use:

BILAC FD is a single component solvent-borne Oil-Modified Alkyd paint with fast drying, good durability, higher gloss and better opacity properties. BILAC FD is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

NIPPON POLYURETHANE is a two-pack Polyurethane Finish based on the chemical reaction of the polyfunctional Acrylic Polyol and the Isocyanate based material with excellent weathering resistance coating. High duty finishes for maximum gloss and colour retention.

NIPPON 1226 EPOTAR HB BLACK is a two pack, polyamide cured, high-build coal tar epoxy coating. It can be applied up to 350 microns or even thicker in one coat. This is intended for immersion and non-immersion services which require excellent protection against fresh and salt water, abrasion and splashes of corrosive chemicals.

NIPPON EA9 is a two-pack, low gloss Amine Adduct Epoxy Finish coating specially developed to achieve long term corrosion protection for many types of surfaces i.e. aluminium, galvanizing, steel and concrete for corrosion environment. It is specially formulated for use as finishing lining for storage tank of palm oil derivatives, vegetable oil, potable water, etc...

NIPPON EP4 CLEAR SEALER is a two-pack, high gloss Polyamide Epoxy Finish for use on concrete, plaster, brick and most types of building boards and. It is recommended for non-immersion services.

Physical Characteristics of Paint:

NIPPON EA4 is a two-pack, high gloss Amine-Adduct Epoxy coating for use on steel, concrete, plaster, brick and most types of building boards and blocks where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. Non-skid quality available upon request.

Physical Characteristics of Paint

NIPPON S450 HEAT RESISTING BLACK is based on silicone resin with pigment which can withstand continuous temperature up to 450°C, provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

NIPPON HEAT RESISTING ALUMINIUM is a silicone based coating which can withstand continuous temperature up to 600°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

Physical Characteristics of Paint:

NIPPON S350 HEAT RESISTING AL is a silicone based coating which can withstand continuous temperature up to 350°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

Physical Characteristics of Paint:

NIPPON S500 HEAT RESISTING PRIMER is a silicone based coating with Zinc Dust Anti corrosive pigment which can withstand continuous temperature up to 500°C. It provides excellent protection for exhaust manifolds, furnaces, boiler, chimneys and other installations exposed to extreme temperatures.

NIPPON EPOXY MIO is a two-pack high build polyamide cured epoxy coating containing Micaceous Iron Oxide pigment. It is specially formulated to give high order of protection for steel structure again corrosion. If it is to be applied over steel surface, it is preferable to be used in combination with the primers as recommended.

NIPPON PU UNDERCOAT WHITE is a two-pack Polyurethane Paint based on the chemical reaction of the polyfunctional acrylic and the isocyanate based material.

NIPPON NIOZ is a two-pack solvent based coating based on Ethyl Silicate and Zinc Dust. It is suitable for use on steel as a shop primer, as a primer for high performance system and as a single treatment coating for a variety of marine environment.

NIPPON EA9 WHITE PRIMER is a two-pack, low gloss Amine Adduct Epoxy Primer specially developed to achieve long term corrosion protection for many types of surfaces i.e. aluminium, galvanizing, steel and concrete for corrosion environment. It can be used as intermediate or finish lining for storage tank of palm oil derivatives, vegetable oil, potable water, etc.

NIPPON EA9 RED OXIDE PRIMER is a two-pack, low gloss Amine Adduct Epoxy Primer designed for use as a high performance primer for many types of surfaces i.e. aluminium, galvanizing, steelwork, concrete, GRP and phenolic sheeting for corrosion environment.

NIPPON ZINC RICH PRIMER HS is a two-pack Epoxy shop primer for use on abrasive blasted steel prior to application of final paint system. It is recommended where high level of corrosive resistance is required.

Physical Characteristics of Paint

NIPPON ZINC PHOSPHATE BLAST PRIMER is a two-pack Epoxy-Amine anti-corrosive primer with non-toxic Zinc Phosphate as its pigment. It is recommended for use in combination with Nippon EA-4 Finish, Nippon EA-9 Finish and Nippon Polyurethane Finish for corrosive environment.

Performance Characteristics

BILAC is a single component solvent-borne Oil-Modified Alkyd paint with good durability, higher gloss and better opacity properties. BILAC is used as a finishing coat over primed wood and metal surfaces both internal and external.

Physical Characteristics of Paint

NIPPON 1105 FAST DRYING PRIMER is a blend of special fast drying binder with zinc phosphate anti-corrsive pigments to protect metal from rusting under mild and moderate conditions for long period of time. 

Physical Characteristics of Paint

NIPPON 1150 R/O FAST DRYING PRIMER is a blend of special fast drying binder with Zinc Phosphate anticorrosive pigments and Red Oxide pigment to protect metal from rusting under mild and moderate conditions for long periods of time.

Physical Characteristics of Paint

NIPPON PAINT 1100 FAST DRYING PRIMER is a blend of special fast drying binder with zinc phosphate anti-corrsive pigments to protect metal from rusting under mild and moderate conditions for long period of time. 

Physical Characteristics of Paint

BILAC METAL RED OXIDE PRIMER is an Oil-Modified Alkyd based anti-rust primer used as an economical protective coating for iron and steel surfaces under non-immersion condition.

Physical Characteristics of Paint

BILAC ALUMINIUM WOOD PRIMER is an Oil-Modified Phenolic based primer with Aluminium pigments for wood surfaces. Its excellent sealing property makes it an efficient sealer for woodwork both internal & external.

Physical Characteristics of Paint

BILAC ALUMINIUM PAINT is a single component solvent-borne Phenolic resin based paint with high lustre, excellent durability and long term anti-corrosive protective property. It is a coating for all kind of primed metal & wooden surfaces, both internal and external use.

Physical Characteristics of Paint

NIPPON 3000 UNDERCOAT WHITE is an Oil-Modified Alkyd undercoat with a high opacity and high solid coating that will effectively hide the substrate and impart a good film build to the overall coating system. Widely used as an undercoat over timber and metal.

Physical Characteristics of Paint

NIPPELUX 1702 MIO is an Oil-Modified Alkyd based coating pigmented with Micaceous Iron Oxide. It is recommended for use as protective coating on steel structure. It may be overcoated with alkyd based finish or left uncoated.

Physical Characteristics of Paint

BILAC UNDERCOAT WHITE is an Oil-Modified Alkyd undercoat with a high opacity and high solids coating that will effectively hide the substrate and impart a good film build to the overall coating system. Widely used as an undercoat over timber and metal.

Physical Characteristics of Paint

NIPPON ROAD LINE PAINT is a Thermoplastic Acrylic Resin based paint. It is tough, fast-drying and weatherdurable coat formulated to withstand heavy wear for road and floor marking.

Physical Characteristics of Paint

NIPPON REFLECTIVE ROAD LINE PAINT is a Thermoplastic Acrylic Resin with Reflective Beads based paint. It is tough, fast-drying and weather-durable coat formulated to withstand heavy wear for road and floor marking with reflective property.

Physical Characteristics of Paint